電梯套就是電梯門口外面一層不銹鋼的門框。不銹鋼電梯套對電梯起固定，維護墻壁，裝修裝飾的用途。隨著社會的展開，往常人們對不銹鋼電動門套的質量懇求越來越高。那么不銹鋼電梯套的分類和安裝留意事項是怎樣的?

　　The elevator cover is a layer of stainless steel door frame outside the elevator entrance. Stainless steel elevator sleeves are used for fixing elevators, maintaining walls, and decorating. With the development of society, people's demand for the quality of stainless steel electric door frames has become increasingly high. So what are the classification and installation precautions for stainless steel elevator sleeves?

　　分類：

　　Classification:

　　不銹鋼門套按照材質可分為201不銹鋼門套，304不銹鋼門套。不銹鋼電梯套按照表面紋路可分為鏡面不銹鋼門套，拉絲不銹鋼門套。不銹鋼經過真空鍍鈦工藝處置后賦予門套很多種顏色，比如鈦金色不銹鋼門套，玫瑰金不銹鋼門套，黑色不銹鋼門套。

　　Stainless steel door frames can be divided into 201 stainless steel door frames and 304 stainless steel door frames according to their materials. Stainless steel elevator covers can be divided into mirror stainless steel door covers and brushed stainless steel door covers according to surface patterns. After being treated with vacuum titanium plating technology, stainless steel door frames are given many colors, such as titanium gold stainless steel door frames, rose gold stainless steel door frames, and black stainless steel door frames.

　　安裝留意事項：

　　Installation precautions:

　　1、安裝大門套之前應問建筑方能否有地軸線，由于井道中心線一定與地軸線平行。由于建筑有誤差，所以要先問好此事，否則將帶來不用要的省事。

　　1. Before installing the door cover, the construction party should be asked if there is a ground axis, as the centerline of the shaft must be parallel to the ground axis. Due to errors in the construction, it is necessary to inquire about this matter first, otherwise it will bring unnecessary convenience.

　　2、單臺電梯要留意首層兩側出墻距離應分歧。(假設只需首層有的話)

　　2. For a single elevator, it is important to note that the distance between the walls on both sides of the first floor should be different. (Assuming only the first layer is needed)

　　3、多臺電梯安裝要保證出墻的距離分歧外，一切大門套外側邊緣應在一個平面上。

　　3. The installation of multiple elevators should ensure that the distance from the wall is different, and all outer edges of the door cover should be on the same plane.

　　4、假設每層都有大門套，那么要安裝廳門后再訂做廳門套。

　　4. Assuming that each floor has a door cover, then the hall door cover needs to be customized after the installation of the hall door.

　　5、如有裝飾層還應問裝飾層的厚度。

　　5. If there is a decorative layer, the thickness of the decorative layer should also be asked.

　　6、遇到其它細致情況應按甲方懇求去做或協商。

　　6. When encountering other detailed situations, Party A shall comply with the request or negotiate accordingly.

　　本文由電梯門套提供技術支持，更多的詳細精彩內容請點擊我們的網站http://nhdyxx.com，我們將會全心全意為您提供滿意的服務。

　　This article is supported by elevator door frames. For more detailed and exciting content, please click on our website http://nhdyxx.com We will wholeheartedly provide you with satisfactory service.