現在房價是越來越高了，很多買了房的朋友都想把自己的房子裝修的很漂亮。尤其是門套是裝修重要的。我想很多朋友對門套都不是非常的熟悉，甚有的朋友都不知道門套是什么。其實門套就是一種建筑裝潢術語.是指門里外兩個門框。也有直接稱作門框的。不同的人愛好不一樣，所選擇的門套也是不一樣。下面小編就詳細給大家分享有關于門套的內容。希望對大家有所幫助。

　　Nowadays, housing prices are getting higher and higher, and many friends who have bought a house want to decorate it beautifully. Especially the door frame is the most important aspect of decoration. I think many friends are not very familiar with door frames, and some even don't know what a door frame is. Actually, door frame is a term used in architectural decoration It refers to the two door frames inside and outside the door. There are also those directly called door frames. Different people love different things, and the door frames they choose are also different. Below, the editor will share with you in detail the content related to door frames. I hope it is helpful to everyone.

　　門套一米

　　How much is the door frame per meter

　　門套是一種建筑裝潢術語,是指門里外兩個門框。也有直接稱作門框的。而無紡布門套，是一種多用在裝修裝満過程中為防止門受損而設計的門的保護套。原木門套大概300元到500元一米，而實木門套是300元到1000元一米。

　　Door frame is a building decoration term that refers to two door frames inside and outside a door. There are also those directly called door frames. Non woven door frames are a type of protective cover designed to prevent damage to doors during decoration and installation processes. Wooden door frames cost approximately 300 to 500 yuan per meter, while solid wood door frames are priced at 300 to 1000 yuan per meter.

　　門套的作用

　　The function of door frames

　　原來的作用是為了固定門扇和保護墻角(因為以前的墻面沒有或很少有現在這樣高質量的墻面漆，是需要保護的)。

　　The original function was to fix the door leaf and protect the wall corner (because previous walls did not have or rarely had high-quality wall paint like now, which needed protection).

　　但是現在這種問題已經不存在了，也就失去了實際功能需要，而變成了一種純個人審美的需求

　　But now this problem no longer exists, and it has lost its practical functional needs, becoming a purely personal aesthetic need

　　常用在裝修裝潢過程中，用來保護門免受刮傷、腐蝕、破損、臟污等，一般是量身定做，上面印有裝修裝潢公司的基本信息，以便廣告宣傳，質地，物美價廉。

　　Commonly used in the decoration process to protect doors from scratches, corrosion, damage, dirt, etc., it is usually tailored and printed with the basic information of the decoration company for advertising purposes. The texture is environmentally friendly and cost-effective.

　　門套如何安裝

　　How to install the door frame

　　如果是傳統方式--現場制作的門套，是由現場裝飾工人直接用釘子固定在門洞的墻體，而如果是成套門產品的門套安裝(現在越來越多的用戶均采用成套門產品)，則要考慮兩個問題:

　　If it is the traditional way - on-site production of door frames, which are directly fixed to the wall of the door opening by on-site decoration workers with nails, while if it is the installation of door frames for complete door products (more and more users now use complete door products), two issues need to be considered:

　　一是相應的成套門產品，其門套的技術結構是否符合作為成套門產品所須具備的牢固性、精準性以及穩定性這二大技術特征:

　　One is whether the technical structure of the door frame of the corresponding complete set of door products meets the two major technical characteristics of firmness, accuracy, and stability required as a complete set of door products:

　　二是成套門安裝者對于安裝現場的事先勘測與安裝時的工藝流程的規范性(如采用發泡劑等方式對于門套牢固性、精準性和日后使用的穩定性所有可能產生的影響)。

　　The second is the standardization of the pre survey and installation process of the installation site by the complete door installer (such as the use of foaming agents and other methods that may have an impact on the firmness, accuracy, and stability of the door frame for future use).

　　1、根據設計圖紙檢查門的規格、開啟方向、相關配件等

　　1. Check the specifications, opening direction, and related accessories of the door according to the design drawings

　　2、用卷尺量門洞的高與寬。門的標準高寬尺寸是200cmx80cm;衛生間的門高寬是200cmx70cm。尺寸如有出入要及時糾正，

　　2. Measure the height and width of the door opening with a tape measure. The standard height and width dimensions of the door are 200cmx80cm; The height and width of the bathroom door are 200cmx70cm. If there is any discrepancy in size, it should be corrected in a timely manner,

　　一側門洞兩條垂直線。3、測量位置線，確定門框的位置，用墨斗彈拉出垂直線

　　Two vertical lines on one side of the door opening. 3. Measure the position line, determine the position of the door frame, and use an ink fountain to pull out the vertical line

　　4、在垂直線上用沖擊鉆打眼，孔眼與孔眼之間的距離約為30cm，一側門兩排共10個孔眼。沖擊鉆的鉆頭應為12mm，所鉆孔眼深度約為6cm。

　　4. Drill holes with an impact drill on the vertical line, with a distance of about 30cm between each hole. There are a total of 10 holes in two rows on one side of the door. The drill bit of the impact drill should be 12mm, and the depth of the drilled hole should be about 6cm.

　　5、將小木楔用鐵錘逐個釘入孔眼，以便固定門框板。小木楔的體積大小為5cmx1.5cmx1.5cm，以落葉松制作的為好，因為落葉松的木質結構緊，不容易松動。

　　5. Nail the small wooden wedges into the holes one by one with a hammer to secure the door frame panel. The volume size of the small wooden wedge is 5cmx1.5cmx1.5cm, and it is better to make it from larch because the wood structure of larch is tight and not easy to loosen.

　　6、開料制作門框。左右做兩側門框龍骨的木工板尺寸為200cmx 3cmx8cm，門框頂龍骨的木工板尺寸為80cmx3cmx8cm。將高密度九厘板涂膠粘在龍骨上，再用汽槍釘固定，

　　6. Cutting materials to make door frames. The size of the wooden board for the left and right door frame keels is 200cm x 3cm x 8cm, and the size of the wooden board for the top keel of the door frame is 80cm x 3cm x 8cm. Apply glue to the high-density 9cm board and stick it to the keel, then fix it with air gun nails,

　　7、將制作好的三條門框按門的形狀連接起來，并且用大釘子在接合處固定

　　7. Connect the three pre made door frames according to the shape of the door and fix them at the joint with large nails

　　8、用刨子將連接好的門框表面修平整，修整邊角，棱角分明。

　　8. Use a planer to smooth the surface of the connected door frame, trim the edges and corners, and make them sharp and angular.

　　9、將門框放到門洞上，按墻面的水平線為準，門框下拿木頭或者磚頭墊起，調節門框的高度。下面預留5cm埋在地板的龍骨中。

　　9. Place the door frame on the doorway, aligning it with the horizontal line of the wall. Use wood or bricks to support the frame and adjust its height. Reserve 5cm below to be buried in the keel of the floor.

　　10、在門框的上面釘一個釘子，把線垂掛上，通過線垂來調整門框的垂直，一邊衡量一邊用麻花釘將門框固定在門洞上。

　　10. Nail a nail on the door frame, hang the line vertically, adjust the verticality of the door frame through the line verticality, and use Fried Dough Twists nails to fix the door frame on the door opening while measuring.

　　11、制作門臉的線條。門臉可以是現成買的，也可以是施工人員按照圖紙做出來的。制作完成后，就把門臉固定到門框上六，這樣門套就基本完成了

　　11. Create the lines for the door face. The storefront can be purchased ready-made or made by construction personnel according to the drawings. After the production is completed, fix the door face to the door frame six times, so that the door frame is basically completed

　　12、把門放到門套上比劃好，確定合頁在門套上的具體位置，再按合頁的厚度切出口徑。也切出鎖套的口徑。將門安裝到門套上，合頁用鑼絲刀將鑼絲釘擰緊。注意門與門套的間不得大于1.5mm，以順暢開關門為準。

　　12. Mark the door on the door frame, determine the specific position of the hinge on the door frame, and then cut the diameter according to the thickness of the hinge. Also cut out the diameter of the lock sleeve. Install the door onto the door frame, and use a gong wire knife to tighten the gong wire nails on the hinges. Note that the distance between the door and the door frame should not exceed 1.5mm, and the smooth opening and closing of the door should prevail.

　　13、門套表面的附著物及灰塵贓物，然后涂膩子。在涂膩子前先在門臉與墻面之間貼上美文紙，防止噴涂油漆時沾到墻面上。涂膩子時一定要均勻，修補好門套上釘眼。

　　13. Remove the attachments and dust on the surface of the door frame, and then apply putty. Before applying putty, stick art paper between the door face and the wall to prevent it from sticking to the wall when spraying paint. When applying putty, be sure to apply it evenly and repair the nail holes on the door frame.

　　14、噴涂油漆。油漆噴涂效果會更加細膩一點，而細部可用刷子涂刷。

　　14. Spray paint. The paint spraying effect will be more delicate, and details can be brushed with a brush.

　　15、將鎖安裝到鎖孔上，小心不要弄壞油漆。

　　15. Install the lock onto the lock hole, be careful not to damage the paint.

　　以上就是給大家分享的有關于門套的內容，希望我們的分享對大家有所幫助。本文由 不銹鋼電梯門套  友情奉獻.更多有關的知識請點擊  http://nhdyxx.com/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　The above is the content about door frames that we have shared with you. We hope our sharing will be helpful to everyone. This article is a friendly contribution from stainless steel elevator door frames For more related knowledge, please click http://nhdyxx.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.