不銹鋼門套線包邊的做法

The method of stainless steel door frame wire edge wrapping

一.用沖擊電鉆在門4周大洞眼,并插入木楔。

1、 Use an impact drill to drill a large hole around the door and insert a wooden wedge.

二.將一五厘大芯板(或者夾板)靠墻側進行防潮處理(刷光油二遍后在貼珍珠棉)。用釘校訂固定后,再用鐵釘加固。門套線條打底用九厘夾板。打底夾板外側用實木線條收口。合頁位置加板襯固或者封兩層一五厘大芯板。

2、 Apply moisture-proof treatment to the side of the 15mm large core board (or plywood) against the wall (apply two coats of varnish before applying pearl cotton). After fixing with nails, reinforce with iron nails. Use a 9mm plywood to base the door frame lines. Close the outer side of the bottom plywood with solid wood lines. Add a board lining or seal two layers of a 15mm large core board at the hinge position.

三.門套與門扇相合的地方到進門邊的側面用九厘夾板做止口板,止口深度與門的厚度相同。

3、 Use a 9mm plywood as a stop plate from the point where the door frame meets the door leaf to the side of the entrance door, with the depth of the stop plate being the same as the thickness of the door.

四.面板用白乳膠涂勻后貼于打第大芯板及止口板上,并用不銹鋼蚊釘適量加固。

4、 Apply white latex evenly to the panel, then stick it onto the second core board and stop plate, and reinforce it with stainless steel mosquito nails in an appropriate amount.

五.門套線條寬度1般為六0—八0.厚度八.

5、 The width of the door frame line is generally 60-80. The thickness is 8

六.廚衛門套線條里側用不銹鋼(啞光)線條為好。

6、 It is better to use stainless steel (matte) lines on the inner side of the kitchen and bathroom door frames.

七.門套及門窗套垂直、水平誤差不超過二(二m以上不超過三)對于角線誤差不超過三(二m以上不超過五).

7、 The vertical and horizontal errors of door and window frames shall not exceed two (no more than three for a distance of two meters), and the errors of corner lines shall not exceed three (no more than five for a distance of two meters)

八.門套雙側墻與門套之間距離在門套線條不能壓住接縫時,宜先用水泥沙漿掛鋼釘封平(用板定模灌漿)干燥后方可封板打第,在門套線條能壓住接縫時可用板封龍骨結構。

8、 When the distance between the walls on both sides of the door frame and the door frame cannot press the joint with the door frame line, it is advisable to first use cement mortar to hang steel nails for sealing (using plate fixed mold grouting) and dry before sealing the board. When the door frame line can press the joint, the board can be used to seal the keel structure.

九.單面門套用九厘板打底(凸窗應注意窗簾位置)。其他與雙面門套同。入戶大門可封單邊實木線條門套。

9、 Single sided door frames should be bottomed with a 9mm board (attention should be paid to the position of curtains for protruding windows). Other items are the same as double-sided door frames. The entrance door can be sealed with single-sided solid wood line door frames.

一0.窗套不宜包臺面,臺面用大理石鋪貼(防盜網宜在窗套面板封后制作)。單面門套:在原來有門的基礎上起裝潢作用,不起經受門的氣力。

10. The window cover should not cover the countertop, and the countertop should be paved with marble (the anti-theft net should be made after the window cover panel is sealed). Single sided door frame: It serves as a decoration on the basis of the original door and does not withstand the force of the door.

做不銹鋼門套線包邊的注意事項

Notes on making stainless steel door frame wire edging

不銹鋼門套線包邊1般都是定制,很少有現場制作的,由于目前工人的技術水平達不檢修評定標準,而且現場也沒有的不銹鋼施工作人員。

Stainless steel door frame wire edging is usually customized and rarely produced on site. Due to the current technical level of workers not meeting the inspection and evaluation standards, and the lack of professional stainless steel construction personnel on site.

在制作不銹鋼門套的時候,咱們都是按門套基層的尺寸畫好圖,該折的部位廠家折好,采取全能膠或者者玻璃膠粘貼,立面與頂面交接也不用焊接!

When making stainless steel door frames, we always draw according to the size of the base layer of the door frame. The manufacturer folds the parts that need to be folded and uses universal glue or glass glue to stick them. There is no need to weld the connection between the facade and the top surface!

本文由德州電梯不銹鋼包邊友情奉獻.更多有關的知識請點擊: http://nhdyxx.com真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated by Texas Elevator's stainless steel edging friendship. For more information, please click: http://nhdyxx.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned